For data centres
Pedestal decks and walkways for data centres.
ELMICH VersiJack pedestals hold paving and decking level over roofs, podiums and services, with nothing fixed through the waterproofing. Lift a tile and the valve, cable or membrane underneath is in reach. We are ELMICH's authorised representative for India and install with our own crews.
- 13 mm to 1,014 mm
- No fixings through the membrane
- Lift-out access
- Fire-rated version
A paver lifted out of a deck on VersiJack pedestals. Photo: ELMICH, Singapore.

In short
Raised paving on adjustable pedestals keeps a roof walkable without touching its waterproofing. Data centres put chillers, dry coolers and pipe racks on their roofs, and maintenance teams walk among them every day. VersiJack pedestals from ELMICH of Singapore, part of Sika since 2025, carry paving or decking at a set level from 13 mm to just over a metre, correct falls of up to 5% and sit on the membrane without fixings. Pipes and cables run underneath, rain drains below the surface, and any tile lifts by hand. Vertvista is ELMICH's authorised representative for India: we lay the pedestals out around your services, supply them with their test reports and install them with our own crews.
- Height
- 13–1,014 mm per pedestal, set in fine steps
- Slope
- Up to 5% at the top and 5% at the base
- Fire
- FR versions Class Bfl-s1 to EN 13501-1
- Proof
- Independent compression tests; certified Singapore Green Building Product
Where pedestals go on a data centre
Roofs
Walkways among the plant
Level paths between chillers, dry coolers and cooling towers, so nobody walks on the membrane.
VersiJackPlant areas
Paving around equipment
Level, non-slip paving up to the plinths of chillers and dry coolers, with the roof falls corrected underneath.
Services
Paving over pipes and cables
Pipes and cable trays run in the void under the paving and stay within reach.
Terraces and podiums
Decks for staff and visitors
Timber or tile decks for breakout terraces and entrance podiums, levelled over the slab falls.
Roof gardensGrounds
Grass that takes a fire tender
TurfPave XD grass pavers keep fire-access lanes green and drivable.
TurfPave XDStormwater
Rain stored under the yard
VersiTank modules hold or soak away run-off from large roofs and hardstands.
VersiTankWhy pedestals rather than screed
- Waterproofing untouchedPedestals stand on the membrane on wide, rounded bases. Nothing is drilled or bonded, so the roof stays as the waterproofing contractor handed it over.
- Access in minutesAny tile or deck board lifts by hand. Valves, drains, cables and the membrane are in reach without breaking anything.
- Lighter on the slabA raised deck weighs a fraction of a screed of the same height. Your structural consultant gets the load per square metre from our data sheet.
- Water drains underneathRain runs through the open joints to the roof falls below, so the surface does not pond, and the perforated bases do not hold water.
- Level over fallsHeight adjusts in fine steps and slope correctors take out falls of up to 5%, so the walking surface is flat on a sloping roof.
- Dry and quickNo curing and no wet trades on a live campus. A deck can be lifted and laid again when the roof is redone or the plant changes.

Services stay in reach
The void under the paving carries pipes and cables, and the joints let rain through to the roof below.
Each tile rests on four pedestal corners, so lifting one tile opens the space under it without disturbing its neighbours.
Illustration: ELMICH, Singapore.
Tall decks, tested
VersiJack C covers 13 mm to 1,014 mm with up to three barrel extenders, each height held by a locking ring. For tall decks we set the pedestal spacing from independent compression tests by Singapore Test Services at full height, not from the catalogue load alone, and tie tall pedestals into a frame or bracing where the deck needs it.

VersiJack at a glance
- Height
- 13–1,014 mm (VersiJack C, up to three barrel extenders)
- Slope correction
- Up to 5% at the top and 5% at the base
- Design load
- 10 kN per pedestal (ELMICH catalogue)
- Base
- 205 mm across, perforated, with rounded edges
- Material
- Recycled polypropylene; FR versions in reinforced thermoplastic
- Fire (FR versions)
- Class Bfl-s1 to EN 13501-1
- Service temperature
- −30 to 80 °C; FR versions −30 to 115 °C
- Certification
- Singapore Green Building Product
- Also sold as
- SikaRoof® VersiJack®
Test reports and data sheets come with every submittal.
How we work on a data-centre site
- SurveyLevels, falls, drains and services mapped on the roof.
- LayoutPedestal grid, heights and access points drawn for approval, with the load data for your structural consultant.
- Fire and safetyThe fire-rated version where your fire consultant asks for it; method statements and risk assessments before work starts.
- Samples and mock-upPedestals, pavers and a mock-up bay on site before the full order.
- InstallOur own crews from Mumbai, Pune, Bengaluru, Hyderabad, Chennai, Gujarat and Delhi NCR, under the site's permit-to-work and safety rules, in phases around live plant.
- HandoverAs-built layout, spare pedestals and tiles, and care instructions for the facility team.
For your consultants
ELMICH pedestals under landmark paving
Enlarge: Jewel Changi Airport, Singapore
Enlarge: Reichstag, Berlin
Enlarge: Mandarin Oriental, Kuala Lumpur
Enlarge: UOB Plaza, SingaporeProjects and photos: ELMICH, Singapore.
Frequently asked
Can the pedestals sit straight on the waterproofing?
Yes, on most membranes. The bases are wide, rounded at the edges and perforated so water drains away. Where the membrane maker asks for it, we add a protection pad under each pedestal. Nothing is drilled or bonded into the roof.
Can pedestals carry chillers or generators?
No. Heavy plant stands on its own plinths or steel. The pedestals carry the walkways, paving and decks around it, for people on foot and light trolleys.
How high can a VersiJack deck be?
VersiJack C runs from 13 mm to 1,014 mm with barrel extenders, each height held by a locking ring. Tall decks are tied into a frame or braced, and the pedestal spacing is set from independent compression tests at full height. Above that height the deck needs a substructure designed by your structural consultant.
Is there a fire-rated pedestal?
Yes. The FR versions are rated Class Bfl-s1 to EN 13501-1 and take service temperatures up to 115 °C, against 80 °C for the standard pedestal. We use them wherever your fire consultant asks for them.
How do you reach a drain or valve under the deck?
Lift the tile above it by hand. Access points are marked on the layout over drains, valves and cable runs, and the pedestals stay where they are.
Will pavers lift in the wind on a roof?
That depends on the height of the building, the exposure and the paver weight. We check uplift with your structural consultant and fit paver retainers and edge clips where the deck needs them.
Is VersiJack a raised access floor for data halls?
No. VersiJack is for outdoor and roof paving and decks. Raised access floors inside data halls are a different, steel-panel system.
Planning a deck for a data centre?
Send the roof layout and the services drawing. We will come back with a pedestal layout, loads and samples.
Or call +91 70452 51178 or write to info@vertvista.com
